Italy produces more wine than any country in the world and Molinas is the largest Italian cork supplier with over 1 billion corks produced annually. Molinas Cork was started over 100 years ago by Pietro Molinas on the Italian island of Sardinia. Besides its beautiful beaches and designation as one of the world's five Blue Zones, Sardinia is known for its large, government protected Cork tree forests.

Today, the 4th generation of the Molinas family sustainably harvests cork from these protected trees. Compared to most cork available in the market, the bark is allowed to mature an additional year. This leads to a less porous, higher quality cork, and has less impact on the forest. Throughout the entire process from tree to finished cork, quality control is strictly monitored. MoreFlavor! is proud to represent Molinas Cork in the USA.

Manufactured thanks to a high technological process, MP ECO is a natural colmated cork stopper, coated with particles of selected cork.

An exclusive productive process, in which are used adjuvants with aqueous base, allowing to obtain the manufacturing a cork stoppers offering remarkable technical and organoleptic performances, with a guarantee of an optimal bottle sealing, as there is a total absence of migrations into the wine. Once closed the lenticels with the cork particles, the cork stoppers gain also an esthetical improvement. The MP ECO is the ideal solution for the wineries that want to bottle their wines using a traditional closure looking also at an attractive rate.

Manufactured following the strictest production processes implemented at Molinas cork factory, it offers a complete traceability and it is submitted to continuous organoleptic control during its different processing steps, the best guarantee for the wines.

Tolerances on Normal Dimensions:

Height: Nom. Value +/- 0,4 mm
Diameter: Nom. Value +/- 0,3 mm
Humidity: Min: 3% Max: 8%
Ovalization: < 0,5 mm
Characteristics Physical / Mechanical / Sensory:

Perossidi: < 0,2 mg/stopper
Organoleptic test: < 2%
Dust transfer: < 1,5 mg/stopper
Finishing Treatments:

Genesis steam treatment for the reduction of tar and other volatile substances.
Pores and lenticellar canals filled with cork powder and adhesives. Polyurethane adhesives used for agglomeration of the body and gluing of washers with food certification for food contact.
Wash: with diluted peracetic acid.
Thermal Marking.
Silicone lubricant and adhesives with food certification for food contact.

The post Colmated Wine Corks | Molinas MP ECO | Imperfection Corrected Natural Cork | #9 x 1.75″ | 24mm x 44mm Bag of 100 appeared first on Quirky Homebrew Supply.

Italy produces more wine than any country in the world and Molinas is the largest Italian cork supplier with over 1 billion corks produced annually. Molinas Cork was started over 100 years ago by Pietro Molinas on the Italian island of Sardinia. Besides its beautiful beaches and designation as one of the world's five Blue Zones, Sardinia is known for its large, government protected Cork tree forests.

Today, the 4th generation of the Molinas family sustainably harvests cork from these protected trees. Compared to most cork available in the market, the bark is allowed to mature an additional year. This leads to a less porous, higher quality cork, and has less impact on the forest. Throughout the entire process from tree to finished cork, quality control is strictly monitored. MoreFlavor! is proud to represent Molinas Cork in the USA.

Manufactured thanks to a high technological process, MP ECO is a natural colmated cork stopper, coated with particles of selected cork.

An exclusive productive process, in which are used adjuvants with aqueous base, allowing to obtain the manufacturing a cork stoppers offering remarkable technical and organoleptic performances, with a guarantee of an optimal bottle sealing, as there is a total absence of migrations into the wine. Once closed the lenticels with the cork particles, the cork stoppers gain also an esthetical improvement. The MP ECO is the ideal solution for the wineries that want to bottle their wines using a traditional closure looking also at an attractive rate.

Manufactured following the strictest production processes implemented at Molinas cork factory, it offers a complete traceability and it is submitted to continuous organoleptic control during its different processing steps, the best guarantee for the wines.

Tolerances on Normal Dimensions:

Height: Nom. Value +/- 0,4 mm
Diameter: Nom. Value +/- 0,3 mm
Humidity: Min: 3% Max: 8%
Ovalization: < 0,5 mm
Characteristics Physical / Mechanical / Sensory:

Perossidi: < 0,2 mg/stopper
Organoleptic test: < 2%
Dust transfer: < 1,5 mg/stopper
Finishing Treatments:

Genesis steam treatment for the reduction of tar and other volatile substances.
Pores and lenticellar canals filled with cork powder and adhesives. Polyurethane adhesives used for agglomeration of the body and gluing of washers with food certification for food contact.
Wash: with diluted peracetic acid.
Thermal Marking.
Silicone lubricant and adhesives with food certification for food contact.

The post Colmated Wine Corks | Molinas MP ECO | Imperfection Corrected Natural Cork | #9 x 1.75″ | 24mm x 44mm Bag of 25 appeared first on Quirky Homebrew Supply.

The post Racking Tube – Replacement Tip – 3/8 in Stainless Steel appeared first on Quirky Homebrew Supply.

Instructions:

Sanitize and rinse your Easy-Siphon.
Get the inner tube gasket and the outer tube wet.
Attach the curved siphon to a hose.
Submerge the end of Easy-Siphon into your container.
If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to.
Pull the inner tube up about 7" until the liquid fills the tube.
Pump the inner tube down and siphon will begin.
Pull out inner tube and sanitize Easy-Siphon for storage.

The post The Mini Easy 3/8″ (5/16″) Auto Siphon appeared first on Quirky Homebrew Supply.

Can be bolted to a Bench, but can also be used stand-alone.

Reinforced base and steel Column
Reinforced plastic head and metal piston
Use with standard 26.5 mm Crown Caps / Caps
Has a pulling lever-type action with minimum exertion, accommodating bottles from 3 inches to 14 inches in height.

Full cup 26mm steel capping head.

The post Monster Bench Bottle Capper appeared first on Quirky Homebrew Supply.

The post Replacement Washer/Gasket for Spigot appeared first on Quirky Homebrew Supply.

The post White Plastic Screw Cap – 28 mm appeared first on Quirky Homebrew Supply.

The post Extra Anti-Sediment Tip for 1/2 in Auto-Siphon appeared first on Quirky Homebrew Supply.

The post Extra Anti-Sediment Tip for 3/8 in Auto-Siphon appeared first on Quirky Homebrew Supply.

The post All Plastic Tasting Corks, pack of 12 appeared first on Quirky Homebrew Supply.