The gauge allows you to know the pressure in your bottle, an incredibly handy feature. The flared connections allow for easy cleaning as you can connect on or disconnect your lines in a matter of seconds. Traditionally these lines can be difficult to sanitize because they were permanently connected with hose clamps.

Flush and fill from the bottom of the bottle with an all-stainless filler! Our new design on counter pressure filling features a special valve on top that allows CO2 or beer to flow down the same stainless tube, directly to the bottom of the bottle. The result is a more effective purging of oxygen and fresher tasting beer. The valve has three positions, off, beer and CO2. The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4" tubing.

Still has all the great features of our Original:

All Stainless Construction (except for a brass backing on the pressure gauge)
A true Counter Pressure Filler (for less foaming)
Easy to use Stainless 3-way ball valve on top
Adjustable Stainless pressure release on side
Flushes bottle from the bottom not the top
Beer barb is 1/4". Gas barb is 5/16".

The post Deluxe Counter Pressure Bottle Filler appeared first on Quirky Homebrew Supply.

stainless steel heavy duty bottle filler is our favourite bottling day gadget.

Whether you are filling glass bottles or PET bottles after your fermentation is complete. you need this handy all stainless 304-grade bottle filler.

directly connect with a hose or with your fermenter spigot. it is a much-simplified version of counterpressure bottle filler homebrewing.

Durable than Plastic
easy to clean
its is made of 4 parts – Spring, seat washer, filler valve and Stainless steel 3/8″ OD tube.

very easy to disassemble and clean, we recommend to sanitize and clean, spare parts of bottle filling device are available.

This spring tip beer bottle filler constructed from stainless steel
More durable and longer lifetime
Removable spring nozzle make it easy to clean and sanitize
Spring-loaded tip for easy flow control when filling bottles
This filler is compact, durable, hygienic and easy to fill bottle
Specifications
Material Stainless Steel
Finish Brushed Stainless

The post 3/8″ Stainless Steel Bottle Filler with Spring Tip appeared first on Quirky Homebrew Supply.

Tubing (based on length chosen)
Stainless steel faucet fitting
Stainless steel Tapcooler fitting
Required o-rings for sealing purposes
Comes pre-assembled!

The post Tapcooler Extension Tube – 19 in. appeared first on Quirky Homebrew Supply.

The post Tapcooler Ball Lock Adapter appeared first on Quirky Homebrew Supply.

For starters, a counter pressure bottle filler is better than most bottling solutions, as the bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution.

The Tapcooler solution improves upon the standard counter pressure filler, as it plugs directly into your draft system faucet (tap). Most solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional prep (i.e. more time). With the Tapcooler, you can have it setup and ready to go in less than a minute! The Tapcooler design is also advantageous because after you are done filling the bottle, it stays in place hooked up to your faucet vs. other fillers require you to set aside and pick back up again for the next bottle.

Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16 in. push-fit line, or connect your line to the included barb fitting. Optionally, you can purchase the gas ball lock adapter, which gives you the ability to attach a gas (gray) disconnect directly to the filler unit. This optional accessory is a must have in our book!

With the Tapcooler design, your beer and CO2 are filled from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process

The telescoping bottle connection tube allows you to fill bottles as small as 4.5 in. tall up to 12.5 in. You can fill taller bottles with the Tapcooler, but the tube will not reach the bottom of the bottle, which can lead to some splashing. When filling large mouth containers, a bottle stopper of suitable size and with a 9 mm hole may be used.

The filler features a push button CO2 purge valve, which allows you to purge the bottle of oxygen before & after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer/foam to escape when filling.

One of our most favorite features of the Tapcooler, is that is super easy to clean. Cleaning other bottle fillers can be a chore and take lots of time. The Tapcooler comes apart easily and allows you to clean all parts effectively and easily after each use.

All metal parts that come into contact with your beer, are made of stainless steel (SS304). The barb and ball lock CO2 adapters are made of aluminum.

Lastly, the Tapcooler comes chock full of optional accessories, which will adapt your filler perfectly to your setup. See the related parts section below for list of them!

Forward-Sealing Faucet Compatibility
Tapcooler fits Intertap, Nukatap, Ultratap, Vent-Matic, and Perlick 600 series faucets. These fillers can be converted to fit Perlick 500 series with the optional tap connector. Cannot be used with ventilated beer taps, i.e. non-forward sealing beer taps.

Hooks up directly to any forward sealing faucet for quick and easy use.
Quick setup and easy maintenance.
Perfect for bottling for competitions, sending bottles home with friends, or just to have some bottles on the go!
A range of accessories are offered for more range and easier use!
Purge bottles with CO2 before and after filling for longer lasting beer!
Pressure relief valve allows for control over filling speed and allows excess foam to escape for the perfect pour every time!
Stainless Steel design
Easy to use and clean!

The post Tapcooler Counter Pressure Bottle Filler appeared first on Quirky Homebrew Supply.

The post Fermentech Pro Bottle Filler appeared first on Quirky Homebrew Supply.

The post Enolmatic Wine Bottle Filler appeared first on Quirky Homebrew Supply.

The post 1/2″ Bottle Filler (Easy-Flow/no spring) appeared first on Quirky Homebrew Supply.

The post 1/2″ Spring Loaded Bottle Filler appeared first on Quirky Homebrew Supply.

The post 3/8″ Spring Loaded Bottle Filler – Dual Function appeared first on Quirky Homebrew Supply.